Plot Report
-----------

Report Written:     Saturday, June 16, 2018
Project Path:       E:\Electronics\Proportional Valve Control Board\Proportional Valve Control Board.prj
Design Path:        E:\Electronics\Proportional Valve Control Board\Proportional Valve Control Board 01.pcb
Design Title:       
Created:            2016/04/12 11:36:56 AM
Last Saved:         2018/06/16 09:02:23 PM
Editing Time:       9388 min
Units:              mm (precision 2)


Device Settings
===============


Gerber Settings
===============

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    3.5 format absolute mm.

    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.
    Hardware arcs allowed.


Drill Settings
==============

    Excellon Format 1    Format 3.5 absolute in mm.
    Leading zero suppression.


Plots Output
============

    Plot Job: "E:\Electronics\Proportional Valve Control Board\Proportional Valve Control Board 01.mop"


Gerber Output
=============

E:\Electronics\Proportional Valve Control Board\Plots\Proportional Valve Control Board 01 - Documentation.gbr

    Layers:
    ------------------
    Documentation
    Board Outlines

    D-Code Shape  (mm)
    ---------------------
    D24    Round 0.127
    D25    Round 0.200
    D27    Round 0.050
    D28    Round 0.150

Gerber Output
=============

E:\Electronics\Proportional Valve Control Board\Plots\Proportional Valve Control Board 01 - Top Silkscreen.gbr

    Layers:
    ------------------
    Top Silkscreen
    Board Outlines

    D-Code Shape  (mm)
    ---------------------
    D24    Round 0.127
    D25    Round 0.200
    D28    Round 0.150
    D29    Round 0.600
    D72    Round 0.152
    D73    Round 0.076
    D74    Round 0.254
    D75    Round 0.508
    D76    Round 0.250

Gerber Output
=============

E:\Electronics\Proportional Valve Control Board\Plots\Proportional Valve Control Board 01 - Top Paste Mask.gbr

    Layers:
    ------------------
    Top Paste Mask
    Board Outlines

    D-Code Shape  (mm)
    -------------------------------------------------
    D24    Round 0.127
    D77    Rectangle 2.448 X 3.348  Rotation 90
    D78    Rectangle 0.711 X 0.813
    D79    Rectangle 1.848 X 4.848
    D80    Rectangle 0.711 X 0.813  Rotation 90
    D81    Rectangle 1.148 X 1.448
    D82    Rectangle 1.848 X 4.848  Rotation 90
    D83    Rectangle 2.548 X 7.848
    D84    Rectangle 1.248 X 2.848  Rotation 90
    D85    Rectangle 0.406 X 1.829  Rotation 90
    D86    Bullet 2.848 X 1.348  Rotation 270
    D87    Round 2.848
    D88    Bullet 2.848 X 1.348  Rotation 90
    D89    Rectangle 1.198 X 1.748  Rotation 90
    D90    Rectangle 0.448 X 1.098
    D91    Rounded Rectangle 0.600 X 1.100 X 0.050
    D92    Rectangle 0.356 X 1.092  Rotation 90
    D93    Rectangle 2.362 X 3.048

Gerber Output
=============

E:\Electronics\Proportional Valve Control Board\Plots\Proportional Valve Control Board 01 - Top Copper.gbr

    Layers:
    ------------------
    Top Copper
    Board Outlines

    D-Code Shape  (mm)
    --------------------------------------------------------------
    D24    Round 0.127
    D27    Round 0.050
    D73    Round 0.076
    D74    Round 0.254
    D76    Round 0.250
    D94    Round 0.635
    D95    Round 8.000
    D96    Round 0.400
    D97    Rectangle 2.600 X 3.500  Rotation 90
    D98    Rounded Rectangle 5.500 X 7.000 X 1.600  Rotation 90
    D99    Rectangle 0.864 X 0.965
    D100   Rectangle 2.000 X 5.000
    D101   Rectangle 0.864 X 0.965  Rotation 90
    D102   Rectangle 1.300 X 1.600
    D103   Rectangle 2.000 X 5.000  Rotation 90
    D104   Rectangle 2.700 X 8.000
    D105   Rectangle 1.400 X 3.000  Rotation 90
    D106   Rectangle 0.559 X 1.981  Rotation 90
    D107   Square 1.524
    D108   Round 1.650
    D109   Square 2.000
    D110   Round 2.000
    D111   Bullet 3.000 X 1.500  Rotation 270
    D112   Round 3.000
    D113   Bullet 3.000 X 1.500  Rotation 90
    D114   Rectangle 1.350 X 1.900  Rotation 90
    D115   Rectangle 0.600 X 1.250
    D116   Rounded Rectangle 0.600 X 1.100 X 0.050
    D117   Round 1.778
    D118   Rectangle 0.508 X 1.245  Rotation 90
    D119   Rectangle 2.515 X 3.200
    D120   Round 1.300
    D121   Round 0.900
    D122   Round 2.500
    D123   Round 0.650
    D124   Round 0.810
    D125   Round 1.420
    D126   Round 1.220
    D150   Round 0.500

Gerber Output
=============

E:\Electronics\Proportional Valve Control Board\Plots\Proportional Valve Control Board 01 - Top Solder Mask.gbr

    Layers:
    -------------------
    Top Solder Mask
    Board Outlines

    D-Code Shape  (mm)
    --------------------------------------------------------------
    D10    Round 8.152
    D11    Round 4.152
    D12    Round 0.552
    D14    Round 2.552
    D15    Rounded Rectangle 5.500 X 7.000 X 1.600  Rotation 90
    D16    Square 1.676
    D17    Round 1.802
    D18    Square 2.152
    D19    Round 2.152
    D22    Round 1.572
    D23    Round 0.962
    D24    Round 0.127
    D27    Round 0.050
    D127   Rectangle 2.752 X 3.652  Rotation 90
    D128   Rectangle 1.016 X 1.118
    D129   Rectangle 2.152 X 5.152
    D130   Rectangle 1.016 X 1.118  Rotation 90
    D131   Rectangle 1.452 X 1.752
    D132   Rectangle 2.152 X 5.152  Rotation 90
    D133   Rectangle 2.852 X 8.152
    D134   Rectangle 1.552 X 3.152  Rotation 90
    D135   Rectangle 0.711 X 2.134  Rotation 90
    D136   Bullet 3.152 X 1.652  Rotation 270
    D137   Round 3.152
    D138   Bullet 3.152 X 1.652  Rotation 90
    D139   Rectangle 1.502 X 2.052  Rotation 90
    D140   Rectangle 0.752 X 1.402
    D141   Rounded Rectangle 0.600 X 1.100 X 0.050
    D142   Round 1.930
    D143   Round 3.952
    D144   Rectangle 0.660 X 1.397  Rotation 90
    D145   Rectangle 2.667 X 3.352
    D146   Round 1.372

Gerber Output
=============

E:\Electronics\Proportional Valve Control Board\Plots\Proportional Valve Control Board 01 - Bottom Silkscreen.gbr

    Layers:
    ---------------------
    Bottom Silkscreen
    Board Outlines

    D-Code Shape  (mm)
    ---------------------
    D24    Round 0.127
    D25    Round 0.200

Gerber Output
=============

E:\Electronics\Proportional Valve Control Board\Plots\Proportional Valve Control Board 01 - Bottom Copper.gbr

    Layers:
    ------------------
    Bottom Copper
    Board Outlines

    D-Code Shape  (mm)
    --------------------------------------------------------------
    D24    Round 0.127
    D25    Round 0.200
    D29    Round 0.600
    D94    Round 0.635
    D95    Round 8.000
    D98    Rounded Rectangle 5.500 X 7.000 X 1.600  Rotation 90
    D107   Square 1.524
    D108   Round 1.650
    D109   Square 2.000
    D110   Round 2.000
    D117   Round 1.778
    D120   Round 1.300
    D122   Round 2.500
    D124   Round 0.810
    D125   Round 1.420
    D126   Round 1.220
    D147   Rectangle 2.000 X 4.000
    D148   Round 1.750
    D150   Round 0.500
    D151   Round 2.200

Gerber Output
=============

E:\Electronics\Proportional Valve Control Board\Plots\Proportional Valve Control Board 01 - Bottom Copper (Resist).gbr

    Layers:
    ------------------
    Bottom Copper
    Board Outlines

    D-Code Shape  (mm)
    --------------------------------------------------------------
    D24    Round 0.127
    D148   Round 8.254
    D149   Round 4.254
    D152   Round 2.454
    D153   Round 2.654
    D154   Rounded Rectangle 5.500 X 7.000 X 1.600  Rotation 90
    D155   Square 1.778
    D156   Round 1.904
    D157   Square 2.254
    D158   Round 2.254
    D159   Round 2.032
    D160   Round 4.054
    D161   Round 0.654
    D162   Rectangle 2.254 X 4.254

NC Drill Output
===============

E:\Electronics\Proportional Valve Control Board\Plots\Proportional Valve Control Board 01 - Drill Data - [Through Hole].drl

    Output:
    ---------------------------
    Plated Round Drill Holes
    Plated Slots
    Plated Board Outlines

    Tool  Size       Count   ID
    ----------------------------------
    T001  0.40000 mm 47    F
    T002  0.60000 mm 10    J
    T003  0.80000 mm 8     S
    T004  0.90000 mm 8     D
    T005  1.06680 mm 3     V
    T006  1.20000 mm 4     I
    T007  1.30000 mm 6     L
    T008  1.40000 mm 8     B
    T009  3.50000 mm 4     K
    ----------------------------------
    Total            98
    ----------------------------------

E:\Electronics\Proportional Valve Control Board\Plots\Proportional Valve Control Board 01 - Drill Data - [Through Hole] (Unplated).drl

    Output:
    -----------------------------
    Unplated Round Drill Holes
    Unplated Slots
    Unplated Board Outlines

    Tool  Size       Count   ID
    ----------------------------------
    T001  0.63500 mm 3
    T002  2.40000 mm 1     C
    T003  3.80000 mm 1     W
    T004  4.00000 mm 4     R
    ----------------------------------
    Total            9
    ----------------------------------


Gerber Output
=============

plot.ger

    Layers:
    ------------------
    [Through Hole]
    Board Outlines


Drill Ident Drawing
===================

    Drill Plated Size  Shape ID
    ------------------------------------
    1.400 Y      2.540 Round B
    2.400        2.540 Round C
    0.900 Y      2.540 Round D
    0.400 Y      2.540 Round F
    1.200 Y      2.540 Round I
    0.600 Y      2.540 Round J
    3.500 Y      2.540 Round K
    1.300 Y      2.540 Round L
    4.000        2.540 Round R
    0.800 Y      2.540 Round S
    1.067 Y      2.540 Round V
    3.800        2.540 Round W

    D-Code Shape  (mm)
    ---------------------
    D10    Round 2.540
    D11    Round 0.127

End Of Report.
